Hall and plan objects
Validated plan capacity
Enter hall length and depth or load an example to start the plan.
Planning assumptions
Rectangular hall and objects; no automatic aisle sizing or checks of load capacity, fire protection or escape routes. Doors are rectangular clearance areas inside the hall with dimensions you specify. Stack layers require explicit permission. Article quantities are not converted to pallets automatically.
Plan warehouse requirements
A module is one floor position or rack bay. The full assigned aisle area is counted for every module.
Your result
Enter values or load an example to start calculating.
Calculation & planning limitations
Floor storage: positions = ceiling(pallet requirement ÷ explicitly permitted layers); without permission, one layer applies. Racks: bays = ceiling(pallet requirement ÷ (pallets per level × levels)). Stacking permission is unused in rack mode.
Module area = module length × (module depth + assigned aisle width). Total area = modules × module area ÷ usable share. The model assumes identical modules. Cross aisles, walls, columns, escape routes and ancillary areas are represented only by your dimensions and usable share. Shared aisles are not detected automatically. This calculation does not produce a geometric layout or check load capacity, fire protection, stacking safety or manoeuvring space.