Pozisyon 3811
Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils
Tarife sınıflandırma hiyerarşisi
38MISCELLANEOUS CHEMICAL PRODUCTS3811Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils
Gümrük vergisi oranını kontrol et
Gümrük vergisi oranını kontrol etmek için menşe ülke ve ithalat tarihi gereklidir.
Bu ürün grubu bir sınıflandırma kategorisidir; tek başına beyannamede kullanılabilecek bir gümrük tarife kodu değildir.
Gümrük vergisi oranını kontrol et →Katalog, belirli bir tarihe ait veri görüntüsünden sınıflandırma bilgileri sunar. Geçerli gümrük vergisi oranı, menşeye ve ithalat tarihine bağlıdır. Dampinge karşı vergiler, telafi edici vergiler, korunma önlemleri ve diğer koşullar uygulanabilir. Katalog, her durumda geçerli veya garanti edilmiş bir vergi oranı belirlemez.
Alt ürün grupları
3811111000Anti-knock preparations · Based on lead compounds · Based on tetraethyl-lead3811119000Anti-knock preparations · Based on lead compounds · Other3811190010Anti-knock preparations · Other · Solution of more than 61|% but not more than 63|% by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: -|4,9|% of|1,2,4-trimethyl-benzene, -|4,9|% of naphthalene, and -|0,5|%|of|1,3,5-trimethyl-benzene3811190090Anti-knock preparations · Other · Other3811210011Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Dispersing agent and oxidation inhibitor containing : -|o-amino polyisobutylenephenol (CAS RN 78330-13-9), -|more than 30|% by weight but not more than 50|% by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils3811210012Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Dispersing agent containing : -|esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), -|35|% or more but not more than 55|% by weight of mineral oils and -|with a chlorine content of not more than 0,05|% by weight, used in the manufacture of blends of additives for lubricating oils3811210013Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing|: -|borated magnesium (C16-C24) alkylbenzene sulphonates and -|mineral oils, having a total base number| (TBN) of more than 250, but not more than 350,| for use in the manufacture of| lubricating oils3811210014Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Dispersing agent|: -|containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), -|containing|35|% or more but not more than 55|% by weight of mineral oils, -|with a chlorine content by weight of not more than|0,05|%,| -|having a total base number of less than|15, used in the manufacture of blends of additives for lubricating oils3811210016Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Detergent containing : -|Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) -|40|% or more but not more than 60|% by weight of mineral oils and -|having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils3811210019Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -| a polyisobutylene succinimide based mixture, and -| more than 30|% but not more than 50|% by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils3811210020Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil3811210021Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive containing by weight: -90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (CAS RN 160305-95-3), -3 % or more but not more than 10 % of mineral oil, for use in the manufacture of blends of additives for lubricating oils3811210022Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive consisting essentially of: -Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8), -25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils3811210024Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive consisting essentially of: -Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20, -45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils3811210025Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|a| (C8-18) alkyl polymethacrylate copolymer with| N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000|but not more than 20,000, and -|more than 15|% , but not more than 30|% by weight of mineral oils, for use in the manufacture of| lubricating oils3811210026Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive consisting essentially of: -Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8), -7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils3811210027Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and -mineral oils, for use in the manufacture of lubricating oils3811210028Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive consisting essentially of: -Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8); -triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, -O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds -10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils3811210029Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive containing by weight: -25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), -30 % or more but not more than 65 % of mineral oils, for use in the manufacture of blends of additives for lubricating oils3811210030Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process3811210032Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additive consisting essentially of: -Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2), -4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils3811210033Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and -|mineral oils, having a total base number (TBN) of more than 40|but not more than 100, for use in the manufacture of lubricating oils or|overbased detergents for use in lubricating oils3811210034Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Detergent containing: -benzenesulfonic acid, methyl-, mono-C20-24-branched alkyl derivs., calcium salts (CAS RN 722503-68-6), -more than 30 % but not more than 60 % by weight of mineral oils, and, -having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils3811210037Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|a styrene-maleic anhydride copolymer esterified with C4-C20|alcohols, modified by| aminopropylmorpholine, and -|more than 50|% but not more than 75|% by weight of mineral oils, |for use in the|manufacture of lubricating oils3811210038Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4)3811210048Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: - overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and - by weight more than 25% but not more than 50% of mineral oils, - having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils3811210053Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing:| -|overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15|%|or more, but not more than 30|% and -|by weight more than 40|%|but not more than 60|% of mineral oil, having a total base number|of 280|or more but not more than 420,for use in the manufacture of lubricating oils3811210055Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|low base number calcium polypropylbenzenesulphonate|(CAS RN 75975-85-8) and -|by weight more than|40|% but not more than 60|% mineral oils, having a total base number|of| more than 10|but not more than 25, for use in the manufacture of lubricating oils3811210060Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives for lubricating oils, containing mineral oils, -|based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25|% or more but not more than 35|%, -|with a total base number (TBN) of 280|or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process3811210063Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|an overbased mixture of calcium petroleum sulphonates (CAS RN|61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6|and CAS RN 70024-69-0)| with a total sulphonate content by weight of 15|% or more, but not more than 25|% and -|by weight more than 40|%|but not more than 60|% of mineral oils, having a total base number|of 280|or more but not more than 320, for use in the manufacture of lubricating oils3811210065Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and -|more than 35|% but not more than 50|% by weight of mineral oils, having a sulphur content of more than 0,7|% but not more than 1,3|% by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils3811210070Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives for lubricating oils, -|containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), -|containing mineral oils, -|with a chlorine content by weight of 0,05|% or more but not more than 0,25|%, -|with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process3811210073Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|borated succinimide compounds (CAS RN 134758-95-5), -|mineral oils, and -|having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures|for lubricating oils3811210075Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|Calcium (C10-C14) dialkylbenzenesulfonates, -|more than 40|%, but not more than 60|% by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils3811210077Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Antifoam additives consisting of: -|a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and -|more than 50|% but not more than 80|% by weight of mineral oils for use in the manufacture of| additive blends for lubricating oils3811210080Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing : -|polyisobutylene aromatic polyamine succinimide, -|more than 40|% but not more than 60|% by weight of mineral oils, with a nitrogen content of more than 0,6|% but not more than 0,9|% by weight, for use in the manufacture of additive blends for lubricating oils3811210083Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives containing: -|polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), -|containing more than 31,9|% but not more than 43,3|% by weight of mineral oils, -|not more than 0,05|% by weight chlorine, and -|having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils3811210085Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Additives, -|containing more than 20|% but not more than 45|% by weight of mineral oils, -|based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives3811210090Additives for lubricating oils · Containing petroleum oils or oils obtained from bituminous minerals · Other3811290020Additives for lubricating oils · Other · Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14|alkyl chains, used as a concentrated additive for the manufacture of lubricating oils3811290023Additives for lubricating oils · Other · Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)3811290030Additives for lubricating oils · Other · Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process3811290033Additives for lubricating oils · Other · Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used in the manufacture of blends of additives for lubricating oils3811290038Additives for lubricating oils · Other · Additives consisting of the C12-C14-tert-alkylamine salts of the esters of C14-C18 saturated and C18 unsaturated alcohols with phosphorus pentoxide (CAS RN 1471315-74-8), for use in the manufacture of blends of additives for lubricating oils or greases3811290040Additives for lubricating oils · Other · Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene| with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01|% or more but not more than| 0,5|%, used as a concentrated additive for the manufacture of lubricating oils3811290043Additives for lubricating oils · Other · Reaction products of C14-C18 (branched and linear) and C18 (unsaturated) fatty acids with tetraethylenepentamine (linear, branched, cyclic) (CAS RN 68784-17-8), for use in the manufacture of lubricating oils3811290045Additives for lubricating oils · Other · Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils3811290048Additives for lubricating oils · Other · Mixed C12-C20-alkyl and C14-C18-unsaturated alkyl derivates of phosphonic acid (CAS RN 93925-25-8), containing by weight more than 80 % of oleyl, palmityl and stearyl groups, for use in the manufacture of lubricating oils3811290057Additives for lubricating oils · Other · Additives consisting of reaction products of diphenylamine and branched nonenes with: - more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and - more than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine, - a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils3811290075Additives for lubricating oils · Other · Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils3811290079Additives for lubricating oils · Other · Additives, consisting of the reaction products of 1,3,4-thiadiazolidine-2,5-dithione with hydrogen peroxide and tert-nonanethiol, containing by weight: - 70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and - 10 % or more of 5-(tert-nonyldithio)-1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of blends of additives for lubricating oils3811290085Additives for lubricating oils · Other · Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils3811290090Additives for lubricating oils · Other · Other3811900040Other · Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10% or more but not more than 29,9% of 2-ethylhexanol3811900050Other · Corrosion inhibitor| containing|: -|polyisobutenyl succinic acid and| -|more than 5|% and not more than 20|% by weight of mineral oils for use in the manufacture of blends of additives for fuels3811900060Other · Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight: -25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) -whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4)3811900090Other · Other