Poziție 7607
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2|mm
Ierarhia clasificării tarifare
76ALUMINIUM AND ARTICLES THEREOF7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2|mm
Verificați taxa vamală
Pentru verificarea taxei vamale sunt necesare țara de origine și data importului.
Această grupă de produse este o categorie de clasificare și nu constituie în sine un cod tarifar care poate fi utilizat într-o declarație vamală.
Verificați taxa vamală →Catalogul prezintă informații de clasificare dintr-un set de date aferent unei anumite date. Taxa vamală aplicabilă depinde de origine și de data importului. Se pot aplica taxe antidumping și compensatorii, măsuri de salvgardare și alte condiții. Catalogul nu stabilește o taxă vamală universală sau garantată.
Subgrupe de produse
7607111111Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Of a thickness of 0,007 mm or more but less than 0,021 mm · Consigned from Thailand7607111119Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Of a thickness of 0,007 mm or more but less than 0,021 mm · Other7607111190Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Other7607111910Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm7607111930Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed7607111940Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed7607111950Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7607111960Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For other uses than household aluminium foil, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7607111991Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Aluminium converter foil7607111994Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Household aluminium foil7607111996Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Other7607119044Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Of a thickness of not less than 0,03|mm, without internal layers of other material7607119046Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Other7607119048Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119049Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Other7607119051Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119052Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607119053Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other7607119054Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607119056Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Other7607119065Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Plain aluminium foil with the following parameters: -|an aluminium content of 99,98|% or more -|a thickness of 0,070|mm or more but not more than 0,125|mm -|with a cubic texture of a kind used for high voltage etching · Without internal layers of other material, in coils or in coiled strips7607119067Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Plain aluminium foil with the following parameters: -|an aluminium content of 99,98|% or more -|a thickness of 0,070|mm or more but not more than 0,125|mm -|with a cubic texture of a kind used for high voltage etching · Other7607119071Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119072Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Other7607119073Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119074Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Other7607119075Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119076Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Without internal layers of other material · For use as body panels in the car industry7607119077Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Without internal layers of other material · Other7607119078Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Other7607119079Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Other7607119091Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119092Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607119093Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other7607119094Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607119096Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Other7607191011Not backed · Other · Of a thickness of less than 0,021|mm · Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed · Consigned from Thailand7607191019Not backed · Other · Of a thickness of less than 0,021|mm · Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed · Other7607191090Not backed · Other · Of a thickness of less than 0,021|mm · Other7607199075Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of not less than 0,03|mm but less than 0.2|mm, without internal layers of other material, in coils or in coiled strips7607199084Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607199093Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other · Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7607199094Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other · Other7607199095Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607199096Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other7607201000Backed · Of a thickness (excluding any backing) of less than 0,021|mm7607209100Backed · Of a thickness (excluding any backing) of not less than 0,021|mm but not more than 0,2|mm · Aluminium Composite Panel7607209900Backed · Of a thickness (excluding any backing) of not less than 0,021|mm but not more than 0,2|mm · Other