Товарная позиция 7607
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2|mm
Иерархия тарифной классификации
76ALUMINIUM AND ARTICLES THEREOF7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2|mm
Проверить ставку пошлины
Для проверки ставки пошлины необходимы страна происхождения и дата ввоза.
Эта товарная группа является категорией классификации, а не самостоятельным кодом таможенного тарифа для декларирования.
Проверить ставку пошлины →Каталог содержит сведения о классификации из снимка данных на указанную дату. Применимая ставка пошлины зависит от происхождения товара и даты ввоза. Могут применяться антидемпинговые и компенсационные пошлины, защитные меры и другие условия. Каталог не устанавливает универсальную или гарантированную ставку пошлины.
Подчинённые товарные группы
7607111111Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Of a thickness of 0,007 mm or more but less than 0,021 mm · Consigned from Thailand7607111119Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Of a thickness of 0,007 mm or more but less than 0,021 mm · Other7607111190Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · In rolls of a weight not exceeding 10|kg · Other7607111910Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm7607111930Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed7607111940Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed7607111950Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7607111960Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · For other uses than household aluminium foil, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed7607111991Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Aluminium converter foil7607111994Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Household aluminium foil7607111996Not backed · Rolled but not further worked · Of a thickness of less than 0,021|mm · Other · Other · Other7607119044Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Of a thickness of not less than 0,03|mm, without internal layers of other material7607119046Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Other7607119048Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119049Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Other7607119051Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119052Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607119053Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other7607119054Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607119056Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Aluminium foil in rolls: - having a purity of 99,99 % by weight, - of a thickness of 0,021 mm or more but not more than 0,2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95 % · Other · Other7607119065Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Plain aluminium foil with the following parameters: -|an aluminium content of 99,98|% or more -|a thickness of 0,070|mm or more but not more than 0,125|mm -|with a cubic texture of a kind used for high voltage etching · Without internal layers of other material, in coils or in coiled strips7607119067Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Plain aluminium foil with the following parameters: -|an aluminium content of 99,98|% or more -|a thickness of 0,070|mm or more but not more than 0,125|mm -|with a cubic texture of a kind used for high voltage etching · Other7607119071Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119072Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers · Other7607119073Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Of a thickness of not less than 0,03 mm, without internal layers of other material7607119074Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil · Other7607119075Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119076Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Without internal layers of other material · For use as body panels in the car industry7607119077Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Without internal layers of other material · Other7607119078Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Of a thickness of 0.2 mm · Other7607119079Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Aluminium and magnesium alloy strip or foil: - of an alloy conforming to standards 5182-H19 or 5052-H19, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, - having a camber tolerance of not more than 0,4 mm/750 mm, - of a flatness measurement: I-unit ±4, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 % for use in the manufacture of slats for blinds · Other7607119091Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips7607119092Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607119093Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other7607119094Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607119096Not backed · Rolled but not further worked · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other · Other · Other7607191011Not backed · Other · Of a thickness of less than 0,021|mm · Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed · Consigned from Thailand7607191019Not backed · Other · Of a thickness of less than 0,021|mm · Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed · Other7607191090Not backed · Other · Of a thickness of less than 0,021|mm · Other7607199075Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of not less than 0,03|mm but less than 0.2|mm, without internal layers of other material, in coils or in coiled strips7607199084Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Alloyed, for use as body panels in the car industry7607199093Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other · Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels7607199094Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Without internal layers of other material · Other · Other7607199095Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles · Other7607199096Not backed · Other · Of a thickness of not less than 0,021|mm but not more than 0,2|mm · Other7607201000Backed · Of a thickness (excluding any backing) of less than 0,021|mm7607209100Backed · Of a thickness (excluding any backing) of not less than 0,021|mm but not more than 0,2|mm · Aluminium Composite Panel7607209900Backed · Of a thickness (excluding any backing) of not less than 0,021|mm but not more than 0,2|mm · Other