Position 8481
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
Hiérarchie du classement tarifaire
84NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF8481Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
Vérifier le taux de droit
Le pays d’origine et la date d’importation sont nécessaires pour vérifier le taux de droit.
Ce groupe de produits est une catégorie de classement et ne constitue pas à lui seul un code tarifaire utilisable dans une déclaration.
Vérifier le taux de droit →Le catalogue présente des informations de classement issues d’un instantané daté des données. Le taux de droit applicable dépend de l’origine et de la date d’importation. Des droits antidumping et compensateurs, des mesures de sauvegarde et d’autres conditions peuvent s’appliquer. Aucun taux universel ou garanti ne peut en être déduit.
Sous-groupes de produits
8481100510Pressure-reducing valves · Combined with filters or lubricators · For use in certain types of aircraft8481100590Pressure-reducing valves · Combined with filters or lubricators · Other8481101910Pressure-reducing valves · Other · Of cast iron or of steel · For use in certain types of aircraft8481101990Pressure-reducing valves · Other · Of cast iron or of steel · Other8481109910Pressure-reducing valves · Other · Other · For use in certain types of aircraft8481109940Pressure-reducing valves · Other · Other · Pressure reducing valves in a brass case with: -a length of not more than 30 mm (± 1 mm), -a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles8481109990Pressure-reducing valves · Other · Other · Other8481201020Valves for oleohydraulic or pneumatic transmissions · Valves for the control of oleohydraulic power transmission · For use in certain types of aircraft8481201090Valves for oleohydraulic or pneumatic transmissions · Valves for the control of oleohydraulic power transmission · Other8481209020Valves for oleohydraulic or pneumatic transmissions · Valves for the control of pneumatic power transmission · For use in certain types of aircraft8481209090Valves for oleohydraulic or pneumatic transmissions · Valves for the control of pneumatic power transmission · Other8481309120Check (non-return) valves · Of cast iron or of steel · For use in certain types of aircraft8481309130Check (non-return) valves · Of cast iron or of steel · Other · Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel8481309191Check (non-return) valves · Of cast iron or of steel · Other · Steel check (non-return) valves with: -|an opening pressure of not more than 800|kPa -|an external diameter not more than 37|mm8481309199Check (non-return) valves · Of cast iron or of steel · Other · Other8481309920Check (non-return) valves · Other · For use in certain types of aircraft8481309950Check (non-return) valves · Other · Mechanical check (non-return) valve for opening and closing of the flow of fuel: -with an operating pressure of not more than 250 MPa, -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute, -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, -made of steel8481309990Check (non-return) valves · Other · Other8481401050Safety or relief valves · Of cast iron or of steel · For use in certain types of aircraft8481401090Safety or relief valves · Of cast iron or of steel · Other8481409010Safety or relief valves · Other · For use in certain types of aircraft8481409090Safety or relief valves · Other · Other8481801110Other appliances · Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures · Mixing valves · For use in certain types of aircraft8481801190Other appliances · Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures · Mixing valves · Other8481801910Other appliances · Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures · Other · For use in certain types of aircraft8481801990Other appliances · Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures · Other · Other8481803100Other appliances · Central heating radiator valves · Thermostatic valves8481803900Other appliances · Central heating radiator valves · Other8481804010Other appliances · Valves for pneumatic tyres and inner tubes · For use in certain types of aircraft8481804090Other appliances · Valves for pneumatic tyres and inner tubes · Other8481805100Other appliances · Other · Process control valves · Temperature regulators8481805920Other appliances · Other · Process control valves · Other · Pressure regulating|valve for incorporation into|compressors of motor vehicle air condition|units8481805930Other appliances · Other · Process control valves · Other · Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 MPa operating pressure8481805940Other appliances · Other · Process control valves · Other · Flow-control valve -|made of steel, -|with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5|mm, -|with an inlet hole with a diameter of at least 0,1|mm, but not more than 1,3|mm, -|with chromium nitride coating, -|with a surface roughness of Rp 0,48481805950Other appliances · Other · Process control valves · Other · Electromagnetic valve for quantity control with -|a plunger, -|a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2|Ohm8481805960Other appliances · Other · Process control valves · Other · Electromagnetic valve for quantity control - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH8481805970Other appliances · Other · Process control valves · Other · Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm8481805980Other appliances · Other · Process control valves · Other · Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: -with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, -with an operating pressure of not more than 5.5 bar, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a valve's base width of 22 mm or more but not more than 27 mm, -with a valve's length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines8481805990Other appliances · Other · Process control valves · Other · Other8481806100Other appliances · Other · Other · Gate valves · Of cast iron8481806350Other appliances · Other · Other · Gate valves · Of steel · For use in certain types of aircraft8481806390Other appliances · Other · Other · Gate valves · Of steel · Other8481806950Other appliances · Other · Other · Gate valves · Other · For use in certain types of aircraft8481806960Other appliances · Other · Other · Gate valves · Other · Other · Four-way reversing valve for refrigerants, consisting of: -|a solenoid pilot valve -|a brass valve body including valve slider and copper connections with a working pressure up to 4,5|MPa8481806999Other appliances · Other · Other · Gate valves · Other · Other · Other8481807100Other appliances · Other · Other · Globe valves · Of cast iron8481807310Other appliances · Other · Other · Globe valves · Of steel · For use in certain types of aircraft8481807320Other appliances · Other · Other · Globe valves · Of steel · Pressure- and flow-control valve controlled by external electromagnet: -|made of steel and/or steel alloy(s), -|without integrated circuit, -|of not more than 1000|kPa operating pressure, -|with a flow quantity of not more than 5|l/min, -|without an electromagnet8481807390Other appliances · Other · Other · Globe valves · Of steel · Other8481807910Other appliances · Other · Other · Globe valves · Other · For use in certain types of aircraft8481807940Other appliances · Other · Other · Globe valves · Other · Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: -a withstanding pressure of the valve body of 6,3 MPa, -a leakage ratio of less than 1.6 g/a, -an impurity ratio of less than 1.2 mg/PCS, -an airtight pressure of the valve body of 4.2 Mpa for use in the manufacture of air conditioners8481807990Other appliances · Other · Other · Globe valves · Other · Other8481808130Other appliances · Other · Other · Ball and plug valves · For use in certain types of aircraft8481808190Other appliances · Other · Other · Ball and plug valves · Other8481808530Other appliances · Other · Other · Butterfly valves · For use in certain types of aircraft8481808590Other appliances · Other · Other · Butterfly valves · Other8481808730Other appliances · Other · Other · Diaphragm valves · For use in certain types of aircraft8481808790Other appliances · Other · Other · Diaphragm valves · Other8481809940Other appliances · Other · Other · Other · For use in certain types of aircraft8481809970Other appliances · Other · Other · Other · Pressure- and flow-control valve controlled by external electromagnet: -|made of steel and/or steel alloy(s), -|without integrated circuit, -|of not more than 1000|kPa operating pressure, -|with a flow quantity of not more than 5|l/min, -|without an electromagnet8481809980Other appliances · Other · Other · Other · Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load: -in metal cover, -with electrical connector, -with a force of not more than 10 N, -with an operating voltage of 9 VDC or more but not more than 16 VDC, -with a length of 80 mm or more but not more than 110 mm, -with a width of 80 mm or more but not more than 110 mm, -with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles8481809990Other appliances · Other · Other · Other · Other8481900010Parts · For use in certain types of aircraft8481900025Parts · Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features: -high-pressure die-cast aluminium EN AC-46000, -shot-blasted and machined, -height of 100 mm or more but not exceeding 135 mm, -width of 115 mm or more but not exceeding 150 mm, -weight of 210 g or more but not more than 500 g8481900040Parts · Valve armature: -|for the opening and closing of the flow of fuel, -|consisting of a shaft and a blade, -|with at least 3 but not more than 8 holes on the blade, -|made of metal and/or metal alloy(s)8481900050Parts · Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film8481900060Parts · Nozzle body for the regulation of angle and distribution of fuel injection: -of a cylindrical shape, -made of stainless steel, -with 4 or more, but not more than 16 holes, -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute8481900070Parts · Nozzle needle for opening and closing the flow of fuel in the engine, with: -2 holes, -4 grooves, -a diameter of 3 mm or more, but not more than 6 mm, -a length of 25 mm or more, but not more than 35 mm, -made of stainless steel with hard-chrome plating8481900080Parts · Flow-control valve -made of steel, -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm8481900090Parts · Other