Poziție 3901
Polymers of ethylene, in primary forms
Ierarhia clasificării tarifare
39PLASTICS AND ARTICLES THEREOF3901Polymers of ethylene, in primary forms
Verificați taxa vamală
Pentru verificarea taxei vamale sunt necesare țara de origine și data importului.
Această grupă de produse este o categorie de clasificare și nu constituie în sine un cod tarifar care poate fi utilizat într-o declarație vamală.
Verificați taxa vamală →Catalogul prezintă informații de clasificare dintr-un set de date aferent unei anumite date. Taxa vamală aplicabilă depinde de origine și de data importului. Se pot aplica taxe antidumping și compensatorii, măsuri de salvgardare și alte condiții. Catalogul nu stabilește o taxă vamală universală sau garantată.
Subgrupe de produse
3901101020Polyethylene having a specific gravity of less than 0,94 · Linear polyethylene · High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C3901101050Polyethylene having a specific gravity of less than 0,94 · Linear polyethylene · Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C3901101060Polyethylene having a specific gravity of less than 0,94 · Linear polyethylene · Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min3901101090Polyethylene having a specific gravity of less than 0,94 · Linear polyethylene · Other3901109030Polyethylene having a specific gravity of less than 0,94 · Other · Polyethylene granules, containing by weight 10|% or more but not more than 25|% of copper3901109090Polyethylene having a specific gravity of less than 0,94 · Other · Other3901201000Polyethylene having a specific gravity of 0,94|or more · Polyethylene in one of the forms mentioned in note|6(b) to this chapter, of a specific gravity of 0,958|or more at 23|°C, containing: -|50|mg/kg or less of aluminium, -|2|mg/kg or less of calcium, -|2|mg/kg or less of chromium, -|2|mg/kg or less of iron, -|2|mg/kg or less of nickel, -|2|mg/kg or less of titanium and -|8|mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene3901209000Polyethylene having a specific gravity of 0,94|or more · Other3901300010Ethylene-vinyl acetate copolymers · For cavity filling, for use in certain types of aircraft3901300020Ethylene-vinyl acetate copolymers · Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8) -containing by weight 28 % or more but not more than 49 % of vinyl acetate, -with a melt flow rate of less than 5g/10 min (190 °C/2.16 kg, ASTM D1238), -in the form of pellets3901300030Ethylene-vinyl acetate copolymers · Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5)3901300099Ethylene-vinyl acetate copolymers · Other3901400010Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 · High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C3901400030Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 · Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method|in the form of pellets with: -|more than 10|% but not more than 20|% by weight of copolymer, -|a melt flow rate (MFR 190°C/2,16|kg) of 0,7|g / 10|min or more|but not more than 0,9|g / 10|min, and -|a density (ASTM D4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³ for use in the co-extrusion processing of films for flexible food packaging3901400050Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 · Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C3901400060Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 · Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min3901400090Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0,94 · Other3901903000Other · Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter3901908010Other · Other · For cavity filling, for use in certain types of aircraft3901908053Other · Other · Other · Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 10g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more3901908055Other · Other · Other · Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -|an acrylic acid content of 6|% or more but not more than 50|% by weight, and -|a melt flow rate of 1g/10|min or more at 190|°C/2.16|kg (measured using ASTM D1238)3901908067Other · Other · Other · Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11|% by weight|or more3901908073Other · Other · Other · Mixture containing by weight -|80|% or more, but not more than 94|% of chlorinated polyethylene (CAS RN 64754-90-1) and -|6|% or more, but not more than 20|% of styrene-acrylic copolymer (CAS RN 27136-15-8)3901908075Other · Other · Other · Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the form of pellets3901908085Other · Other · Other · Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the form of pellets3901908091Other · Other · Other · Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid3901908092Other · Other · Other · Chlorosulphonated polyethylene3901908093Other · Other · Other · Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets3901908094Other · Other · Other · Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene3901908097Other · Other · Other · Chlorinated polyethylene, in the form of powder3901908099Other · Other · Other · Other