Code tarifaire douanier 8501522055

Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft

Hiérarchie du classement tarifaire

  1. 85 ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
  2. 8501 Electric motors and generators (excluding generating sets)
  3. 850151 Other AC motors, multi-phase
  4. 850152 Of an output exceeding 750|W but not exceeding 75|kW
  5. 85015220 Of an output exceeding 750|W but not exceeding 7,5|kW
  6. 8501522050 Other
  7. 8501522055 Brushless synchronous alternating current electric motors with permanent magnets, with: -an output power of 1000 W or more, but not more than 1400 W, -a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, -a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, -motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 °, -a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), -a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V- sec/rad, -a back electromotive force (EMF) harmonic order - 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), -a synchronous inductance of 33,49 µH or more, but not more than 37,01 µH, -a cogging torque of not more than 15 mNm, -a friction torque in ambient temperature of not more than 20 mNm, -a maximum motor operation temperature of not more than 200 °C, -with or without a spline on the motor shaft

Vérifier le taux de droit

Le pays d’origine et la date d’importation sont nécessaires pour vérifier le taux de droit.

Vérifier le taux de droit →

Le catalogue présente des informations de classement issues d’un instantané daté des données. Le taux de droit applicable dépend de l’origine et de la date d’importation. Des droits antidumping et compensateurs, des mesures de sauvegarde et d’autres conditions peuvent s’appliquer. Aucun taux universel ou garanti ne peut en être déduit.