Товарная позиция 3920
Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Иерархия тарифной классификации
39PLASTICS AND ARTICLES THEREOF3920Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Проверить ставку пошлины
Для проверки ставки пошлины необходимы страна происхождения и дата ввоза.
Эта товарная группа является категорией классификации, а не самостоятельным кодом таможенного тарифа для декларирования.
Проверить ставку пошлины →Каталог содержит сведения о классификации из снимка данных на указанную дату. Применимая ставка пошлины зависит от происхождения товара и даты ввоза. Могут применяться антидемпинговые и компенсационные пошлины, защитные меры и другие условия. Каталог не устанавливает универсальную или гарантированную ставку пошлины.
Подчинённые товарные группы
3920102300Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · Less than 0,94 · Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits3920102410Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · Less than 0,94 · Stretch film, not printed · For use in certain types of aircraft3920102490Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · Less than 0,94 · Stretch film, not printed · Other3920102505Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · Less than 0,94 · Other · For use in certain types of aircraft3920102590Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · Less than 0,94 · Other · Other3920102810Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · 0,94|or more · For use in certain types of aircraft3920102899Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Of polyethylene having a specific gravity of · 0,94|or more · Other3920104010Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Other · For use in certain types of aircraft3920104099Of polymers of ethylene · Of a thickness not exceeding 0,125|mm · Other · Other3920108100Of polymers of ethylene · Of a thickness exceeding 0,125|mm · Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent3920108910Of polymers of ethylene · Of a thickness exceeding 0,125|mm · Other · For use in certain types of aircraft3920108940Of polymers of ethylene · Of a thickness exceeding 0,125|mm · Other · Other · Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm3920108990Of polymers of ethylene · Of a thickness exceeding 0,125|mm · Other · Other · Other3920202110Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Biaxially oriented · For use in certain types of aircraft3920202150Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Biaxially oriented · Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron3920202190Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Biaxially oriented · Other3920202910Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Other · For use in certain types of aircraft3920202970Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Other · Other · Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: -|a thickness of 55|µm or more but not more than 97|µm, -|a tensile modulus in the machine direction of 0,30|GPa or more but not more than 1,45|GPa, and -|a tensile modulus in the transverse direction of 0,20|GPa or more but not more than 0,70|GPa3920202994Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Other · Other · Mono-axial oriented, co-extruded film: -consisting of 3 to 5 layers, -each layer mainly consisting of polypropylene and/or polyethylene, -each layer containing not more than 10 % by weight of other polymers, -whether or not containing titanium dioxide in the core layer, -of an overall thickness of not more than 75 μm3920202999Of polymers of propylene · Of a thickness not exceeding 0,10|mm · Other · Other · Other3920208010Of polymers of propylene · Of a thickness exceeding 0,10|mm · For use in certain types of aircraft3920208090Of polymers of propylene · Of a thickness exceeding 0,10|mm · Other3920300010Of polymers of styrene · Acrylonitrile-butadiene-styrene, for use in certain types of aircraft3920300030Of polymers of styrene · Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls with: -a thickness of 0,229 mm or more but not more than 0,279 mm, -an titanium dioxide content by weight of 3 % or more but not more than 3,5 %, -on one side a highly hydrophobic, chemically neutral and non-reactive coating3920300090Of polymers of styrene · Other3920431010Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness not exceeding 1|mm · For use in certain types of aircraft3920431092Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness not exceeding 1|mm · Other · Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60|µm or more but not more than 80|µm, containing 30|or more but not more than 40|parts of plasticizer to 100|parts of poly(vinyl chloride)3920431095Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness not exceeding 1|mm · Other · Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet3920431099Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness not exceeding 1|mm · Other · Other3920439010Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness exceeding 1|mm · For use in certain types of aircraft3920439090Of polymers of vinyl chloride · Containing by weight not less than 6|% of plasticisers · Of a thickness exceeding 1|mm · Other3920491010Of polymers of vinyl chloride · Other · Of a thickness not exceeding 1|mm · For use in certain types of aircraft3920491030Of polymers of vinyl chloride · Other · Of a thickness not exceeding 1|mm · Other · Film of a (polyvinyl)chloride-copolymer -|containing by weight 45|% or more of fillers -|on a support3920491099Of polymers of vinyl chloride · Other · Of a thickness not exceeding 1|mm · Other · Other3920499010Of polymers of vinyl chloride · Other · Of a thickness exceeding 1|mm · For use in certain types of aircraft3920499090Of polymers of vinyl chloride · Other · Of a thickness exceeding 1|mm · Other3920510020Of acrylic polymers · Of poly(methyl methacrylate) · Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5|mm or more but not more than 19|mm3920510030Of acrylic polymers · Of poly(methyl methacrylate) · Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 125μm3920510040Of acrylic polymers · Of poly(methyl methacrylate) · Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)3920510050Of acrylic polymers · Of poly(methyl methacrylate) · Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A3920510090Of acrylic polymers · Of poly(methyl methacrylate) · Other3920591000Of acrylic polymers · Other · Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150|micrometres3920599000Of acrylic polymers · Other · Other3920610030Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of polycarbonates · Reflecting sheet: - of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern - covered on one or both sides with one or more layers of plastic or metallisation, and - whether or not covered on one side with a self-adhesive layer and a release sheet3920610040Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of polycarbonates · Extruded thermoplastic foils or films of polycarbonate with: -matt surface texture on both sides -a thickness of more than 50 μm but not more than 200 μm, -a width of 800 mm or more, but not more than 1 500 mm, and -a length of 300 m or more, but not more 2500 m for use in the production of retroreflective products3920610050Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of polycarbonates · Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: -total thickness of more than 230 μm but not more than 270 μm, -top layer thickness of more than 40 μm but not more than 55 μm, -defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), -UV-stabilized top layer3920610090Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of polycarbonates · Other3920621200Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates3920621905Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm3920621908Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side3920621928Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites3920621932Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm3920621938Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm3920621948Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)3920621952Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)3920621960Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm3920621970Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months3920621979Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm3920621985Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules3920621999Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness not exceeding 0,35|mm · Other · Other3920629010Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness exceeding 0,35|mm · Poly(ethylene terephthalate) film in rolls: -|with a thickness of 0,335|mm or more but not more than 0,365|mm, and -|coated with a gold layer with a|thickness of 0,03|μm or more but not more than 0,06|μm3920629090Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of poly(ethylene terephthalate) · Of a thickness exceeding 0,35|mm · Other3920630000Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of unsaturated polyesters3920690020Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of other polyesters · Film of poly(ethylene naphthalene-2,6-dicarboxylate)3920690030Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of other polyesters · Mono- or multilayer, transverse oriented, shrink film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 20 μm or more but not more than 100 μm, -with a length of 2 385 m or more but not more than 9 075 m, -biodegradable and compostable (as determined by the method EN 13432)3920690070Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of other polyesters · Mono- or multilayer, biaxially oriented film: -composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, -with a thickness of 9 μm or more but not more than 120 μm, -with a length of 1 395 m or more but not more than 21 560 m, -biodegradable and compostable (as determined by the method EN 13432)3920690090Of polycarbonates, alkyd resins, polyallyl esters or other polyesters · Of other polyesters · Other3920710000Of cellulose or its chemical derivatives · Of regenerated cellulose3920731000Of cellulose or its chemical derivatives · Of cellulose acetate · Film in rolls or in strips, for cinematography or photography3920738000Of cellulose or its chemical derivatives · Of cellulose acetate · Other3920791000Of cellulose or its chemical derivatives · Of other cellulose derivatives · Of vulcanised fibre3920799000Of cellulose or its chemical derivatives · Of other cellulose derivatives · Other3920910010Of other plastics · Of poly(vinyl butyral) · For use in certain types of aircraft3920910052Of other plastics · Of poly(vinyl butyral) · Other · Poly(vinyl butyral) film: -|containing by weight| 26|% or more but not more than|30|% of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, -|with a thickness|of 0,73|mm or more but not more than 1,50|mm3920910091Of other plastics · Of poly(vinyl butyral) · Other · Poly(vinyl butyral) film having a graduated coloured band3920910093Of other plastics · Of poly(vinyl butyral) · Other · Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: -|a visible light transmission of 50|% or more, -|coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), -|a total thickness of not more than 0,2|mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2|mm3920910095Of other plastics · Of poly(vinyl butyral) · Other · Co-extruded trilayer poly(vinyl butyral) film · Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29|% or more but not more than 31|% of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser3920910097Of other plastics · Of poly(vinyl butyral) · Other · Co-extruded trilayer poly(vinyl butyral) film · Other3920910099Of other plastics · Of poly(vinyl butyral) · Other · Other3920920000Of other plastics · Of polyamides3920930000Of other plastics · Of amino-resins3920940000Of other plastics · Of phenolic resins3920992100Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Polyimide foil and strip, uncoated, or coated or covered solely with plastic3920992840Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Other · Polymer film containing the following monomers: -|poly (tetramethylene ether glycol), -|bis (4-isocyanotocyclohexyl) methane, -|1,4-butanediol or 1,3-butanediol, -|with a thickness of 0,25|mm or more but not more than 5,0|mm, -|embossed with a regular pattern on one surface, -|and covered with a release sheet3920992850Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Other · Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93% (according to DIN EN ISO 13468-1), with a thickness of 25μm or more but not more than 500μm3920992865Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Other · Matt, thermoplastic polyurethane foil in rolls with: -|a width of 1640|mm| (± 10|mm), -|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457), -|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287), -|a thickness of more than 365|µm but not more than 760|µm, -|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)), -|an elongation to break of 470|% (as determined by the method: EN|ISO|527)3920992870Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Other · Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,| -|with a protective layer of poly(ethylene terephthalate) on the other side, and -|with a width of 5|cm or more but not more than 100|cm -|with a length of not more than 2|000|m3920992890Of other plastics · Of other plastics · Of condensation or rearrangement polymerisation products, whether or not chemically modified · Other · Other3920995200Of other plastics · Of other plastics · Of addition polymerisation products · Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm3920995300Of other plastics · Of other plastics · Of addition polymerisation products · Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells3920995910Of other plastics · Of other plastics · Of addition polymerisation products · Other · For use in certain types of aircraft3920995925Of other plastics · Of other plastics · Of addition polymerisation products · Other · Other · Poly(1-chlorotrifluoroethylene) film3920995965Of other plastics · Of other plastics · Of addition polymerisation products · Other · Other · Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|µm or more but not more than 90|µm, a tensile strength at break of 20|MPa or more but not more than 55|MPa and an elongation at break of 250|% or more but not more than 900|%3920995990Of other plastics · Of other plastics · Of addition polymerisation products · Other · Other · Other3920999000Of other plastics · Of other plastics · Other